Baileigh dual miter band saw features 3 hp motor which is driven by an AC inverter built to deliver the reliability that most shops demand. The best part is that the power requirement is still only 220V single phase. 220 Volts single phase dual mitering metal cutting band saw. This dual mitering saw has a full cast iron head and bow that swivels 60 degrees right and 45 degrees left. The horizontal band saw has a 90 degree round capacity of 10-1/2-inches, making this the perfect saw for any fabrication shop. This is achieved through the use of the best materials, full cast iron that is machined to exacting tolerances as well as precision ball bearing guides, which provide the most accurate cuts and long blade life. A full flood coolant system is also standard on the horizontal band saw. Operation of the horizontal band saw is easy as well; there are two mode of operation depending on you preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material this mode is perfect for the small or medium sized fabricators needs. 2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure. Specifications return: manual; Miter adjustment: dual swivel head; Miter angle: 0 to 60 degree, 45 degree L; Motor: high torque 1.5Kw (AC); Motor: 2 horsepower; Capacity round 90 degree by 45 degree by 60 degree by 45L: 10.63-inches by 9.45-inches by 6.3-inches by 8.28-inches; Table height: 35-inches; Capacity rectangular 90 by 45 by 45L: 13.77-inches by 8.66-inches by 9.45-inches by 6.3-inches 7.3-inches by 4.33-inches; Blade guide: carbide by roller; Blade measures: 1-inches by 1/32-inches by 124-1/2-inches; Blade speed (fpm): 66 to 280 variable; Descent control: hydraulic; Drive: gear; Power: 220 volt/1-phase.