Get pure bass with the Boss Audio Elite BA1200 Class A/B Monoblock Amplifier. With 1200 Watts Max Power and MOSFET power supply, you'll feel every beat. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The Elite series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience.
MOSFET Power Supply
Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.
Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.
2 Ohm Stable
2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.
Subwoofer Level Control
A wired remote lets you easily control the subwoofer level for customized output and superior sound.
Strap two amplifiers together to get double the power at an impedance of 2-Ohms.
Switchable Bass Boost
Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Variable Input Control
The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.
Power Input Terminals
When installing all Boss Audio Systems amplifiers, it is important to use the maximum gauge of wire that the power terminals will accommodate. For instance, if an amplifier has 4 gauge power and ground terminals, use high quality 4 gauge multi-strand copper wire to make your power connections. This maximizes the amplifier’s ability to draw the required power upon demand. This also helps prevent overheating that could cause failure. Always make sure your vehicle’s electrical system is capable of handling the current demands from any after-market accessory.
Fuses protect boththe amplifier and the electrical system of your vehicle from faulty conditions.
If you must replace a fuse on the amplifier, always use a fuse of exactly the same type and rating of the one you are replacing. A different type of fuse or rating may result in damage or cause a fire.
If you plan on using multiple amplifiers in your system, be certain that you have the appropriate sized gauge wire to accommodate the current demands for all amplifiers and that the wire is fused correctly at the battery. Connect an empty fuse holder within 18" (45 cm) of the car battery and run a 4 gauge (or heavier) cable from this fuse to the amplifier location. A fused distribution block is recommended when using several amplifiers or accessories.
Proper grounding is essential for any electric accessory in a vehicle.
Some key points to remember: Keep the ground as short as possible. Connect the amplifier’s power ground terminal to the closest point on the chassis of the car. Keep this ground wire to less than 39" (100 cm) in length. Use 4 gauge (or heavier) wire. Scrape any paint away, use a star washer to 'bite' into the metal and secure it tightly using a grounding lug.
Any steps that aren’t followed properly will result in a higher resistance at the ground point, causing unnecessary heat, high current draw, and potentially damaging the electrical accessories in the vehicle.
Please be advised that 'Professional' installation of all of our products is recommended and encouraged. Installation by a professional installer increases the length of any applicable Boss Audio Systems products.
|Product dimensions||10x9.6x2 inches|
آمازون، بزرگترین، نوآورترین و پرارزشترین خرده فروشی در سراسر دنیاست. با نزدیک به ۵۰۰ میلیون محصول که بالاترین میزان تنوع و حق انتخاب را به ارمغان می آورد. چهار گروه بیشترین خرید را از مالتینا دارند: