►Carbon Brush：Play the role of electrical conduction by friction with motor to produce spark, which prolong the service of life of the motor; According to normal working principle, the carbon brush will wear out, and the motor would stop working after run out of carbon, so it should be replaced regularly.
►Speed Controller：Adjust 6 dials of variable speed freely, meeting your different needs for smart adjustment of output power when operating.
►Copper Cores：It is in good conductivity, could reduce resistance and maintain a good working temperature, to extend the motor life.
►Stator：High-quality thickened silicon steel sheet for impact resistance, stable and quiet operation.
►Capacitance：Protecting the motor during start-up and overload.
►Rotor：After dynamic balancing test, the stability of high speed operation is improved.
►Ball Bearing：High-performance bearings provide high-speed operation stability and service of life.
Good power performance
Pure copper motor for good performance in demanding average home project, fantastic for DIYer and Crafter.
Comes in a black solid case with a variety of accessories.It accepts dremel bits/accessories.
Variable speed adjustment
It has 6 levels of RPM starting from 10000 to 3200, ensure optimal cutting, grinding and carving speeds
Warm Tips For Usage
●Please DO NOT use the spindle lock after switched on and driving in high speed rotation, because the functional structure inside the spindle would broke(the chuck might fly if situation is serious). If used, it might lead to injury and problems in later operation like unable to hold down the spindle lock and screw tightly, or sliding.
●Please use the Spanner to tighten when using and DO NOT tighten the chuck too strong to lock the spindle.
●Please MUST keep the rotation speed reaching at around 2.3W( corresponding to dial 4) when using to avoid possible problems of great shock and hemp phenomenon if driving in low RPM.
●Please keep the shaft NOT be knotted or in a large angle bending. Or it will lead to increased vibration of handle and the shaft can not be used anymore.
Installation of Bits on Flex Shaft:
1.Remove the shaft collar.
2.Loosen the collet nut.
3.Raise the handle end of the flexible shaft & shake gently until the inner flexible shaft protrudes from the fitting collar.
4.Insert the inner flexible shaft into the collet then tighten the collet nut.
5.Screw the flexible shaft fitting collar onto the rotary tool.
6.Insert the hex key into the hole on the handle.
7.Loosen collet nut then insert shank of accessory into collet.
8.Tighten collet nut by included allen wrench and check all fittings to ensure they are securely fastened.
|Item weight||3.5 pounds|
|Package dimensions||11.5x9.5x3.3 inches|
|Size||Corded Rotary Tool|
|Color||Black & Orange|
|Item package quantity||1|
|Number of pieces||1|
|Warranty description||24 Months Warranty|
|Shipping weight||3.55 pounds|
|Date first available||January 16, 2017|
آمازون، بزرگترین، نوآورترین و پرارزشترین خرده فروشی در سراسر دنیاست. با نزدیک به ۵۰۰ میلیون محصول که بالاترین میزان تنوع و حق انتخاب را به ارمغان می آورد. چهار گروه بیشترین خرید را از مالتینا دارند: