1 Avoiding test smoke-sensitive parts with this machine.
2 The machine can work on EVAP system with specific adapter (pressure of machine was larger than EVAP request ).
3 Don't work with the machine continuously more than 8 minutes. Bottom of the machine will give out heat, be careful!
4 Inject paraffin oil or baby oil in machine before detecting (oil is not included in the pack)
1.Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube.
4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
5.Turn on the power switch and POWER lights up to indicate that the power supply of the smoke generator is normal. Press AIR MODE then pump starts to work. SMOKE MODE can start working only after the mode is started.
6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
7.After leak detection, please connect well the wires and pipe.
8. Please repair the leak part timely with specific tool.
1x Unit Set
(Due to shipment policy, testing oil not included.)
|Item weight||11.48 pounds|
|Package dimensions||12.6x12.3x9.4 inches|
|Manufacturer part number||AUTOOL-SDT206-MACHINE|
|Shipping weight||11.48 pounds|
|Date first available||November 8, 2018|
آمازون، بزرگترین، نوآورترین و پرارزشترین خرده فروشی در سراسر دنیاست. با نزدیک به ۵۰۰ میلیون محصول که بالاترین میزان تنوع و حق انتخاب را به ارمغان می آورد. چهار گروه بیشترین خرید را از مالتینا دارند: