We updated the Ceramic Paint Coating formula to slow down the solvency flashing to give the product more open time. This has many beneficial effects: able to work on larger surface areas, less quickly tacky, easier application and removal. Additionally, the formula was re-worked to make it more immediately slick after application and make the product less tacky upon removal.
Adam's Paint Coating offers an incredibly durable barrier designed to protect the surface of your vehicle from dirt and bonded contaminants, while preserving the depth and luster of your paint! This new coating includes the latest advances in ceramic technology, is user friendly, and safe on clear coats, single stage, and lacquer finishes. Applying Adam’s Paint Coating not only minimizes the chances of introducing swirl marks and scratches during washing, but its hydrophobic nature will cause water to bead and repel off like crazy!
Adam’s Paint Coating is a product that contains ceramics. It forms a semi-permanent bond with the painted surfaces of your vehicle, creating a very durable layer of protection that can last one to two years, while providing incredible shine. Products like our Americana Paste Wax, Buttery Wax, H2O Guard & Gloss, and Paint Sealant provide excellent protection and shine for your vehicle typically for 6 months or less. They are relatively forgiving when it comes to application or removal of the products, like using a strip wash or clay bar to start fresh, whereas with Adam’s Paint Coating, it must be removed by machine polishing due to it forming a much stronger bond with the painted surface.
KEY PRODUCT FEATURES:
Make Sure To Clean, Clay, & Polish Your Car
It is imperative to remove scratches and swirl marks by machine polishing the vehicle's finish. Also, removing all polish residue and cleaning the vehicle's surface with Adam’s Coating Prep is necessary.
Apply Drops On Applicator
Put on the set of supplied rubber gloves to avoid any coating contact with your skin. Adam’s Paint Coating will make the applicator sticky.
Pour several drops of Paint Coating onto a microfiber applicator. Immediately secure the cap back onto the bottle to avoid premature curing of the product inside of the bottle.
Work Chemical Into Your Paint
Wipe the applicator onto the paint in approximately a 2-foot by 2-foot area or less, in up-down or left-right movements, using even pressure across the surface. Ensure that the Paint Coating fully covers the area. You may need to wipe back and forth a few times to level the coating properly.
After approximately 30 seconds, coating will have a rainbow effect in appearance.
Buff Away After 2-3 Minutes - See Amazing Results!
Allow it to continue to haze for 2-3 minutes, then use a second clean Single Soft Towel to quickly wipe away all residue – do not allow Paint Coating to dry on any painted surfaces!
Move onto the next area of the paint, repeating Steps 7-9 – front fenders, doors, and so on. Do not apply any other products to the paint or expose the paint to any moisture for 24 hours.
Discard the microfiber applicator afterward. It is a single-use item that will harden as it dries when used with Adam’s Paint Coating. Discard the Single Soft Towel used to wipe off the coating residue as well.
After 24 hours, add even more protection and shine by applying a layer of Adam’s Ceramic Boost.
Q: What is a Ceramic Coating?
A: If you ask, “What makes a ceramic coating different than a wax?”, a ceramic coating contains SiO2 silica protection that puts a measurable layer of very durable protection over the clear coat or single stage paint on your vehicle with Adam’s Paint Coating and any exterior textured plastic and rubber trim with Adam’s Trim Coating. Ceramic coatings bond to a surface at the nanomolecular level and are hydrophobic by nature, not only beading water, but literally pushing water off the surface of the vehicle, which allows for easier cleaning at every wash. They typically cannot be removed by normal wash processes, and they provide excellent UV protection to the exterior surfaces of your vehicle. We have been testing, tweaking, and re-testing our ceramic coatings for well over a year now to provide systems that are relatively forgiving for a person new to this type of product, to a breeze for those already familiar with applying a coating. Ceramic coatings do require a very specific application process that must be followed to achieve the best results without any issues; they are more involved than applying a wax, letting it haze, and then buffing it off, like most customers are familiar with.
Q: How is this product used?
A: Like all ceramic coatings, preparation and application technique are very important. Read and follow the printed instructions, and watch the product video, prior to applying this product for the first time. Since this coating begins to cure when exposed to air, the initial application needs to be correct.
Q: Why is the cure time so long?
A: The time that it takes for our coatings to cure depends on ambient conditions (temperature, humidity, air flow, etc.). The recommended time frame of 24-48 hours covers most typical application conditions. However, certainly use common sense (do not apply outside during winter temps). Also, be aware that simply wiping away the coating residue with a microfiber towel or that plastic trim feels dry to the touch does not mean it is cured. The coated surface needs 24-48 hours to fully cure before getting damp/wet or getting exposed to residue from additional products.
Q: What is a hardness rating in terms of Adam’s ceramic coating products?
A: Adam’s Polishes ceramic coating products each have a different hardness rating on the Pencil Hardness Test. Each coating was designed for its specific application to work best on that specific surface or environment, while factoring in ease of application and removal, as well as longevity. The Pencil Hardness Test determines resistance to scratches on a coated surface by using pencils and other materials of specific hardness ratings. The higher the rating, the more durable the coating is, but it is also more difficult to remove in the future.
Q: Why is this product so expensive?
A: Ceramic coatings are expensive, and our bottles are 50ml, which will provide enough product for one or two normal size sedans or trim on multiple vehicles, provided the coating is stored and maintained properly. Always replace the cap immediately after dispensing the product onto the applicator each time, and store the product in a cool, dark place.
|Ceramic Spray Coating||Ceramic Paint Coating (50 ml)||Ceramic Wheel Coating (50 ml)|
|Duration||6-8 Months||2+ Years||4+ Years|
|Cure Time||4 Hours||24 Hours||24 Hours|
|Ease Of Use||Beginner||Intermediate||Expert|
|Ceramic Layer Of Protection||✓||✓||✓|
In the Car Detailing Industry, ceramic coatings and nano technology have become buzzwords and industry standards and although sometimes effective, they cause a lot of confusion. To add fuel to that confusion, Adam's released an innovative and game changing product to kick off 2019. If you haven't heard of it yet, check out our Ceramic Spray Coating. After that release, our customers had a lot of questions regarding ceramic products. They wanted to know what was the difference between our CSC and Ceramic Boost? How does a ceramic come out of a sprayer without crystallizing the sprayer? Why would i use the CSC over your paint coating or wheel coating? How does the Ceramic Spray Coating compare to other "Ceramic Spray" or “Ceramic Hybrid Wax” products on the market? After receiving an overwhelming amount of questions, we decided to minimize the confusion by launching a brand within a brand; hence, the Introduction of Adam's Premium Ceramics Line!
When it comes to protecting your paintwork, there are three different silos - 1. Organics (Natural Carnauba Waxes), 2. Synthetics (Man-made Sealants), and 3. Ceramics. Organics and Synthetics have been around for some time but Ceramic Technology is relatively new to the industry. The team at Adam's believes that Ceramics are the future and we believe that we have some pretty good chemists who are capable of bringing the most innovative & technologically advanced formulas to car care!
Our ceramics are broken down into four different categories: Prep, Accessories, Coatings and Maintenance.
As you begin the ceramic detailing process, it is essential to have assembled all the accessories, tools, applicators and towels that make the job successful. Preparation is the key to success, which is why we highlight prep products with the identifier of a white label. After prep, the next step is to apply a layer of ceramic protection. When you take a look at the amount of products in the car care market, you can see a lot of products with the name "ceramic" on the product label and it gets pretty overwhelming and confusing. The team at Adam's wanted to put an end to that confusion and with that, we made a clear distinction between products that are "True Ceramics" and products that are "SIO2 Infused". To visually distinguish the difference, we gave our SIO2 Infused ceramic products a grey label and our True Ceramic products a black label. The process is simple; you coat your car with our black labeled products and boost or enhance your protection with our grey labeled SIO2 infused products. Although SIO2 infused products, can also be used as a stand alone sealant, Adam's has specially formulated these products to bond to your ceramic protection and extend the life of your top coat.
|Manufacturer part number||CPC|
|Date first available||May 23, 2018|
آمازون، بزرگترین، نوآورترین و پرارزشترین خرده فروشی در سراسر دنیاست. با نزدیک به ۵۰۰ میلیون محصول که بالاترین میزان تنوع و حق انتخاب را به ارمغان می آورد. چهار گروه بیشترین خرید را از مالتینا دارند: